Industrial Wastewater Treatment Recycling and Reuse

Author: Vivek V. Ranade
Publisher: Butterworth-Heinemann
ISBN: 0444634037
Format: PDF, ePub, Docs
Download Now
Industrial Wastewater Treatment, Recycling and Reuse is an accessible reference to assist you when handling wastewater treatment and recycling. It features an instructive compilation of methodologies, including advanced physico-chemical methods and biological methods of treatment. It focuses on recent industry practices and preferences, along with newer methodologies for energy generation through waste. The book is based on a workshop run by the Indus MAGIC program of CSIR, India. It covers advanced processes in industrial wastewater treatment, applications, and feasibility analysis, and explores the process intensification approach as well as implications for industrial applications. Techno-economic feasibility evaluation is addressed, along with a comparison of different approaches illustrated by specific case studies. Industrial Wastewater Treatment, Recycling and Reuse introduces you to the subject with specific reference to problems currently being experienced in different industry sectors, including the petroleum industry, the fine chemical industry, and the specialty chemicals manufacturing sector. Provides practical solutions for the treatment and recycling of industrial wastewater via case studies Instructive articles from expert authors give a concise overview of different physico-chemical and biological methods of treatment, cost-to-benefit analysis, and process comparison Supplies you with the relevant information to make quick process decisions

Wastewater Recycling Reuse and Reclamation Vol I

Author: Saravanamuthu Vigneswaran
Publisher: EOLSS Publications
ISBN: 1905839243
Format: PDF, Kindle
Download Now
Total supply of fresh water on earth far exceeds human demand. However, scarcity of water currently faced in many regions of the world is caused by two reasons. First, its availability in time and space is not equally distributed. Thus there is problem of water in the wrong place, or at the wrong time and in wrong quantities. Second, while the population growth and expanded industrial activities are increasing demands on available water resources, they also jeopardize the availability of freshwater in adequate quantities by discharge of pollutants into freshwater sources. It is at times like these, when the rising curve of water demand intersects the fluctuating curve of water availability, recycle and reuse of wastewater is seriously considered. Wastewater recycling, reuse and reclamation have been, now, accepted as appropriate ways to conserve water resources as well as to contain polluted waters from contaminating other available clean water sources. This book gives a comprehensive review on water quantity and quality, simple water supply and sanitation systems, and leads to domestic, agricultural and industrial water reuse. Thus, it will provide useful information not only to technologists but also for planners, managers, and NGOs involved in the water sector. The contribution to the book comes from a broad pool of experts, working on technology, policy, health, and economy aspects of water management. Involvement of both academics and industry personnel from developing and developed countries makes this contribution broader and useable for a wide readership.

NDUSTRIAL WASTEWATER TREATMENT

Author: PATWARDHAN, A.D.
Publisher: PHI Learning Pvt. Ltd.
ISBN: 8120353323
Format: PDF, ePub
Download Now
Industries use a large number of substances in their manufacturing processes and also generate solid residues, liquid effluents and gaseous emissions as wastes. These may be organic, inorganic, inert or toxic compounds but are hazardous in nature and thus need to be treated and disposed off suitably in order to maintain ecological balance of the environment. Also, wherever feasible, recovery of useful by-products, recycling of water and reuse of wastewater (with or without treatment) save resources and reduce production cost. In view of the above, the book has been written, and now updated in the second edition to discuss sources, characteristics and treatment of wastewater produced in industries such as textiles, dairy, tanneries, pulp and paper, fertilizer, pesticide, organic and inorganic chemicals, engineering and fermentation. Many flow diagrams have been included to illustrate industrial processes and to indicate the sources of wastewater. After describing treatment for individual factories, the author discusses the more advanced and economical common effluent plants. The text uses simple and straightforward language and makes the presentation attractive. This book should prove extremely useful to undergraduate students of civil and chemical engineering and postgraduate students of environmental science and engineering. Industrial design consultants will also find the book very handy. To the Greens, it may offer some of the solutions to their concerns. NEW TO THE SECOND EDITION • Includes the concept of Zero Liquid Discharge (ZLD) in Chapter 1 and provides further information in Appendix A. • Incorporates brief information about plasma gasification technique in Appendix B and advanced oxidation technique in Chapter 3. • Includes ecological aspects of pollution control and a reference on benthal load in Chapter 4. • Provides information on jute retting in Chapter 6. • Incorporates topics such as photocatalytic degradation of phenols from coke oven wastes, HCl recovery from pickling operations and e-waste handling and disposal in Chapter 13.

Water Recycling and Resource Recovery in Industry

Author: Piet Lens
Publisher: IWA Publishing
ISBN: 9781843390053
Format: PDF, ePub, Mobi
Download Now
Water Recycling and Resource Recovery in Industry: Analysis, Technologies and Implementation provides a definitive and in-depth discussion of the current state-of-the-art tools and technologies enabling the industrial recycling and reuse of water and other resources. The book also presents in detail how these technologies can be implemented in order to maximize resource recycling in industrial practice, and to integrate water and resource recycling in ongoing industrial production processes. Special attention is given to non-process engineering aspects such as systems analysis, software tools, health, regulations, life-cycle analysis, economic impact and public participation. Case studies illustrate the huge potential of environmental technology to optimise resource utilisation in industry. The large number of figures, tables and case studies, together with the book's multidisciplinary approach, makes Water Recycling and Resource Recovery in Industry: Analysis, Technologies and Implementation the perfect reference work for academics, professionals and consultants dealing with industrial water resources recovery. Contents Part I: Industrial reuse for environmental protection Part II: System analysis to assist in closing industrial resource cycles Part III: Characterisation of process water quality Part IV: Technological aspects of closing industrial cycles Part V: Examples of closed water cycles in industrial processes Part VI: Resource protection policies in industry

Wastewater Recycling Reuse and Reclamation Volume II

Author: Saravanamuthu Vigneswaran
Publisher: EOLSS Publications
ISBN: 1905839251
Format: PDF, ePub, Docs
Download Now
Total supply of fresh water on earth far exceeds human demand. However, scarcity of water currently faced in many regions of the world is caused by two reasons. First, its availability in time and space is not equally distributed. Thus there is problem of water in the wrong place, or at the wrong time and in wrong quantities. Second, while the population growth and expanded industrial activities are increasing demands on available water resources, they also jeopardize the availability of freshwater in adequate quantities by discharge of pollutants into freshwater sources. It is at times like these, when the rising curve of water demand intersects the fluctuating curve of water availability, recycle and reuse of wastewater is seriously considered. Wastewater recycling, reuse and reclamation have been, now, accepted as appropriate ways to conserve water resources as well as to contain polluted waters from contaminating other available clean water sources. This book gives a comprehensive review on water quantity and quality, simple water supply and sanitation systems, and leads to domestic, agricultural and industrial water reuse. Thus, it will provide useful information not only to technologists but also for planners, managers, and NGOs involved in the water sector. The contribution to the book comes from a broad pool of experts, working on technology, policy, health, and economy aspects of water management. Involvement of both academics and industry personnel from developing and developed countries makes this contribution broader and useable for a wide readership.

Membrane Processes for Water Reuse

Author: Anthony Wachinski
Publisher: McGraw Hill Professional
ISBN: 0071748962
Format: PDF
Download Now
COST-EFFECTIVE MEMBRANE SOLUTIONS FOR WATER AND WASTEWATER REUSE APPLICATIONS Written by a water and wastewater industry expert with more than 35 years of experience, this book describes how membrane technology can be used alone, coupled with aerobic or anaerobic processes, or as integrated membrane systems to process treated municipal effluent or industrial wastewater for discharge, recycle, or reuse. After reviewing chemistry fundamentals and basic principles, Membrane Processes for Water Reuse covers microfiltration, ultrafiltration, nanofiltration, reverse osmosis, and membrane coupled bioprocesses. The design, sizing, and selection of membrane technologies for water recycling and reuse applications is discussed in detail. Wastewater reuse case studies and example problems illustrate the concepts presented in this practical, authoritative guide. Coverage includes: Water reuse overview Water quality Basic concepts of membrane filtration processes Low pressure membrane technology--microfiltration and ultrafiltration Diffusive membrane technologies--nanofiltration and reverse osmosis Membrane-coupled bioprocess Design of membrane systems for water recycling and reuse Future trends and challenges

Wastewater Treatment for Pollution Control and Reuse

Author: Sol J. Arceivala
Publisher: Tata McGraw-Hill Education
ISBN: 9780070620995
Format: PDF, ePub, Mobi
Download Now
The last edition of this successful book dealt with disposal of wastewater for pollution control. The current edition, Wastewater Treatment for Pollution Control and Reuse has been thoroughly revised and extends the discussion to the many benefits and various methods for reusing wastewater. New chapters on reuse of wastewater and use of physico-chemical treatment methods, including membrane technologies that are critical for reuse, have been added. Besides the mechanized methods of wastewater treatment the authors have discussed other methods which are not only simple, natural and cost-effective, but also more dependable, especially in developing countries with warm weather.

Wastewater Treatment and Reuse in the Food Industry

Author: Marcella Barbera
Publisher: Springer
ISBN: 3319684426
Format: PDF, ePub, Mobi
Download Now
This Brief is devoted to clean drinking water, which is (one of) the most important asset(s) in the food and beverage industry. In the present time of increasing water scarcity in many areas of the world, supply of clean water especially in the production and packaging chain of foods and beverages, is a crucial issue. This Brief hence outlines why functioning purification and reuse systems for wastewater are becoming more and more interesting and promising technologies in solving the challenge. Readers find in this Brief an introduction to different innovative treatment methodologies. The authors discuss key parameters (such as the water volume to be treated, types and chemical and physico-chemical characteristics of pollutants, but also the intended use of the recycled water) and present various methodologies, such as separation or concentration systems, centrifugation, evaporation, filtration, flotation, gravity separation, membrane techniques, aerobic and anaerobic biological treatments, as well as combined or hybrid systems. Selected specific methods are presented in detail, specifically a new adsorption method for the removal of metal ions.

Industrial Solid Wastes

Author: A. D. Patwardhan
Publisher: The Energy and Resources Institute (TERI)
ISBN: 8179935027
Format: PDF, Docs
Download Now
Industrial solid wastes, unlike liquid effluents and gaseous emissions, receive relatively less attention in terms of treatment, reuse, recycle, and recovery of useful by-products. These solid wastes have great potential for recovery and reuse. Predominantly organic wastes can be effectively treated by biological means to yield useful end products like methane gas as fuel and digested slurry as soil conditioner. Inert materials like plastics are effectively blended with other building materials, thereby improving the quality of the finished product and at least partially solving the problem of disposal of plastics. Inorganic wastes are excellent candidates for recovery of reusable building materials like sand and fine aggregate. Recycling of useful components from e-wastes goes a long way in reducing environmental pollution by toxic and hazardous wastes. This book places before the reader different ways and means used by scientists and engineers to minimize pollution of our natural resources and their overexploitation.