Rigging Equipment Maintenance and Safety Inspection Manual

Author: Joseph MacDonald
Publisher: McGraw Hill Professional
ISBN: 0071719490
Format: PDF
Download Now
Safely maintain and operate rigging equipment Rigging Equipment: Maintenance and Safety Inspection Manual is a must-have for rigging contractors, facility managers, and equipment operators. Featuring regulations, standards, guidelines, and recommendations applicable to critical lifts, this practical guide provides maintenance and safety inspection checklists for rigging equipment, components, and systems, and addresses the required training, planning, and documentation. The safe rigging practices recommended in this book are framed in general terms to accommodate the many variations in rigging practices. Coverage includes: Operating rules--rigging hazards, OSHA regulations, consensus standards, and industry guidelines Operator qualifications, safe operating practices, and operating procedures Planning and preparation before performing rigging Lifting and hoisting equipment and rigging and scaffolding systems Ladders, stairways, ramps, hand and power tools, and electrical systems Maintenance schedules, care, and safe operation of equipment Inspection checklists for rigging equipment before, during, and after use Testing, certification, and registration of rigging equipment Preventive maintenance recordkeeping based on equipment manufacturer's recommendations Proper use of personal safety and protective equipment

Manuals Combined Navy Air Force And Army Occupational Health And Safety Including Fall Protection And Scaffold Requirements

Author:
Publisher: Jeffrey Frank Jones
ISBN:
Format: PDF, ePub, Docs
Download Now
Over 2,900 total pages ... Contains the following publications: 1. NAVY SAFETY AND OCCUPATIONAL HEALTH PROGRAM MANUAL 2. NAVY SAFETY AND OCCUPATIONAL HEALTH (SOH) PROGRAM MANUAL FOR FORCES AFLOAT 3. DEPARTMENT OF THE NAVY (DON) FALL-PROTECTION GUIDE 4. Air Force Consolidated Occupational Safety Instruction 5. U.S. Army Corps of Engineers SAFETY AND HEALTH REQUIREMENTS

Safety and Health Requirements Manual

Author: Robert H. Griffin
Publisher: DIANE Publishing
ISBN: 9780788170157
Format: PDF, Mobi
Download Now
Prescribes the safety & health requirements for all U.S. Army Corps of Engineers activities & operations. It applies to major subordinate commands, districts, laboratories, & field operating activities. Applicability extends to occupational exposure for missions under the command of the Chief of Engineers, whether accomplished by military, civilian, or contractor personnel. Includes 19 appendices on such topics as minimum basic outline for accident prevention plan; emergency operations; crane & derrick inspection criteria; medical surveillance requirements for all activities, & more. Metric conversion table. List of acronyms.

Over 200 U S Department of Energy Manuals Combined CLASSICAL PHYSICS ELECTRICAL SCIENCE THERMODYNAMICS HEAT TRANSFER AND FLUID FUNDAMENTALS INSTRUMENTATION AND CONTROL MATHEMATICS CHEMISTRY ENGINEERING SYMBIOLOGY MATERIAL SCIENCE MECHANICAL SCIENCE AND NUCLEAR PHYSICS AND REACTOR THEORY

Author:
Publisher: Jeffrey Frank Jones
ISBN:
Format: PDF, Docs
Download Now
Over 19,000 total pages ... Public Domain U.S. Government published manual: Numerous illustrations and matrices. Published in the 1990s and after 2000. TITLES and CONTENTS: ELECTRICAL SCIENCES - Contains the following manuals: Electrical Science, Vol 1 - Electrical Science, Vol 2 - Electrical Science, Vol 3 - Electrical Science, Vol 4 - Thermodynamics, Heat Transfer, And Fluid Flow, Vol 1 - Thermodynamics, Heat Transfer, And Fluid Flow, Vol 2 - Thermodynamics, Heat Transfer, And Fluid Flow, Vol 3 - Instrumentation And Control, Vol 1 - Instrumentation And Control, Vol 2 Mathematics, Vol 1 - Mathematics, Vol 2 - Chemistry, Vol 1 - Chemistry, Vol 2 - Engineering Symbology, Prints, And Drawings, Vol 1 - Engineering Symbology, Prints, And Drawings, Vol 2 - Material Science, Vol 1 - Material Science, Vol 2 - Mechanical Science, Vol 1 - Mechanical Science, Vol 2 - Nuclear Physics And Reactor Theory, Vol 1 - Nuclear Physics And Reactor Theory, Vol 2. CLASSICAL PHYSICS - The Classical Physics Fundamentals includes information on the units used to measure physical properties; vectors, and how they are used to show the net effect of various forces; Newton's Laws of motion, and how to use these laws in force and motion applications; and the concepts of energy, work, and power, and how to measure and calculate the energy involved in various applications. * Scalar And Vector Quantities * Vector Identification * Vectors: Resultants And Components * Graphic Method Of Vector Addition * Component Addition Method * Analytical Method Of Vector Addition * Newton's Laws Of Motion * Momentum Principles * Force And Weight * Free-Body Diagrams * Force Equilibrium * Types Of Force * Energy And Work * Law Of Conservation Of Energy * Power – ELECTRICAL SCIENCE: The Electrical Science Fundamentals Handbook includes information on alternating current (AC) and direct current (DC) theory, circuits, motors, and generators; AC power and reactive components; batteries; AC and DC voltage regulators; transformers; and electrical test instruments and measuring devices. * Atom And Its Forces * Electrical Terminology * Units Of Electrical Measurement * Methods Of Producing Voltage (Electricity) * Magnetism * Magnetic Circuits * Electrical Symbols * DC Sources * DC Circuit Terminology * Basic DC Circuit Calculations * Voltage Polarity And Current Direction * Kirchhoff's Laws * DC Circuit Analysis * DC Circuit Faults * Inductance * Capacitance * Battery Terminology * Battery Theory * Battery Operations * Types Of Batteries * Battery Hazards * DC Equipment Terminology * DC Equipment Construction * DC Generator Theory * DC Generator Construction * DC Motor Theory * Types Of DC Motors * DC Motor Operation * AC Generation * AC Generation Analysis * Inductance * Capacitance * Impedance * Resonance * Power Triangle * Three-Phase Circuits * AC Generator Components * AC Generator Theory * AC Generator Operation * Voltage Regulators * AC Motor Theory * AC Motor Types * Transformer Theory * Transformer Types * Meter Movements * Voltmeters * Ammeters * Ohm Meters * Wattmeters * Other Electrical Measuring Devices * Test Equipment * System Components And Protection Devices * Circuit Breakers * Motor Controllers * Wiring Schemes And Grounding THERMODYNAMICS, HEAT TRANSFER AND FLUID FUNDAMENTALS. The Thermodynamics, Heat Transfer, and Fluid Flow Fundamentals Handbook includes information on thermodynamics and the properties of fluids; the three modes of heat transfer - conduction, convection, and radiation; and fluid flow, and the energy relationships in fluid systems. * Thermodynamic Properties * Temperature And Pressure Measurements * Energy, Work, And Heat * Thermodynamic Systems And Processes * Change Of Phase * Property Diagrams And Steam Tables * First Law Of Thermodynamics * Second Law Of Thermodynamics * Compression Processes * Heat Transfer Terminology * Conduction Heat Transfer * Convection Heat Transfer * Radiant Heat Transfer * Heat Exchangers * Boiling Heat Transfer * Heat Generation * Decay Heat * Continuity Equation * Laminar And Turbulent Flow * Bernoulli's Equation * Head Loss * Natural Circulation * Two-Phase Fluid Flow * Centrifugal Pumps INSTRUMENTATION AND CONTROL. The Instrumentation and Control Fundamentals Handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. * Resistance Temperature Detectors (Rtds) * Thermocouples * Functional Uses Of Temperature Detectors * Temperature Detection Circuitry * Pressure Detectors * Pressure Detector Functional Uses * Pressure Detection Circuitry * Level Detectors * Density Compensation * Level Detection Circuitry * Head Flow Meters * Other Flow Meters * Steam Flow Detection * Flow Circuitry * Synchro Equipment * Switches * Variable Output Devices * Position Indication Circuitry * Radiation Detection Terminology * Radiation Types * Gas-Filled Detector * Detector Voltage * Proportional Counter * Proportional Counter Circuitry * Ionization Chamber * Compensated Ion Chamber * Electroscope Ionization Chamber * Geiger-Müller Detector * Scintillation Counter * Gamma Spectroscopy * Miscellaneous Detectors * Circuitry And Circuit Elements * Source Range Nuclear Instrumentation * Intermediate Range Nuclear Instrumentation * Power Range Nuclear Instrumentation * Principles Of Control Systems * Control Loop Diagrams * Two Position Control Systems * Proportional Control Systems * Reset (Integral) Control Systems * Proportional Plus Reset Control Systems * Proportional Plus Rate Control Systems * Proportional-Integral-Derivative Control Systems * Controllers * Valve Actuators MATHEMATICS The Mathematics Fundamentals Handbook includes a review of introductory mathematics and the concepts and functional use of algebra, geometry, trigonometry, and calculus. Word problems, equations, calculations, and practical exercises that require the use of each of the mathematical concepts are also presented. * Calculator Operations * Four Basic Arithmetic Operations * Averages * Fractions * Decimals * Signed Numbers * Significant Digits * Percentages * Exponents * Scientific Notation * Radicals * Algebraic Laws * Linear Equations * Quadratic Equations * Simultaneous Equations * Word Problems * Graphing * Slopes * Interpolation And Extrapolation * Basic Concepts Of Geometry * Shapes And Figures Of Plane Geometry * Solid Geometric Figures * Pythagorean Theorem * Trigonometric Functions * Radians * Statistics * Imaginary And Complex Numbers * Matrices And Determinants * Calculus CHEMISTRY The Chemistry Handbook includes information on the atomic structure of matter; chemical bonding; chemical equations; chemical interactions involved with corrosion processes; water chemistry control, including the principles of water treatment; the hazards of chemicals and gases, and basic gaseous diffusion processes. * Characteristics Of Atoms * The Periodic Table * Chemical Bonding * Chemical Equations * Acids, Bases, Salts, And Ph * Converters * Corrosion Theory * General Corrosion * Crud And Galvanic Corrosion * Specialized Corrosion * Effects Of Radiation On Water Chemistry (Synthesis) * Chemistry Parameters * Purpose Of Water Treatment * Water Treatment Processes * Dissolved Gases, Suspended Solids, And Ph Control * Water Purity * Corrosives (Acids And Alkalies) * Toxic Compound * Compressed Gases * Flammable And Combustible Liquids ENGINEERING SYMBIOLOGY. The Engineering Symbology, Prints, and Drawings Handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. * Introduction To Print Reading * Introduction To The Types Of Drawings, Views, And Perspectives * Engineering Fluids Diagrams And Prints * Reading Engineering P&Ids * P&Id Print Reading Example * Fluid Power P&Ids * Electrical Diagrams And Schematics * Electrical Wiring And Schematic Diagram Reading Examples * Electronic Diagrams And Schematics * Examples * Engineering Logic Diagrams * Truth Tables And Exercises * Engineering Fabrication, Construction, And Architectural Drawings * Engineering Fabrication, Construction, And Architectural Drawing, Examples MATERIAL SCIENCE. The Material Science Handbook includes information on the structure and properties of metals, stress mechanisms in metals, failure modes, and the characteristics of metals that are commonly used in DOE nuclear facilities. * Bonding * Common Lattice Types * Grain Structure And Boundary * Polymorphism * Alloys * Imperfections In Metals * Stress * Strain * Young's Modulus * Stress-Strain Relationship * Physical Properties * Working Of Metals * Corrosion * Hydrogen Embrittlement * Tritium/Material Compatibility * Thermal Stress * Pressurized Thermal Shock * Brittle Fracture Mechanism * Minimum Pressurization-Temperature Curves * Heatup And Cooldown Rate Limits * Properties Considered * When Selecting Materials * Fuel Materials * Cladding And Reflectors * Control Materials * Shielding Materials * Nuclear Reactor Core Problems * Plant Material Problems * Atomic Displacement Due To Irradiation * Thermal And Displacement Spikes * Due To Irradiation * Effect Due To Neutron Capture * Radiation Effects In Organic Compounds * Reactor Use Of Aluminum MECHANICAL SCIENCE. The Mechanical Science Handbook includes information on diesel engines, heat exchangers, pumps, valves, and miscellaneous mechanical components. * Diesel Engines * Fundamentals Of The Diesel Cycle * Diesel Engine Speed, Fuel Controls, And Protection * Types Of Heat Exchangers * Heat Exchanger Applications * Centrifugal Pumps * Centrifugal Pump Operation * Positive Displacement Pumps * Valve Functions And Basic Parts * Types Of Valves * Valve Actuators * Air Compressors * Hydraulics * Boilers * Cooling Towers * Demineralizers * Pressurizers * Steam Traps * Filters And Strainers NUCLEAR PHYSICS AND REACTOR THEORY. The Nuclear Physics and Reactor Theory Handbook includes information on atomic and nuclear physics; neutron characteristics; reactor theory and nuclear parameters; and the theory of reactor operation. * Atomic Nature Of Matter * Chart Of The Nuclides * Mass Defect And Binding Energy * Modes Of Radioactive Decay * Radioactivity * Neutron Interactions * Nuclear Fission * Energy Release From Fission * Interaction Of Radiation With Matter * Neutron Sources * Nuclear Cross Sections And Neutron Flux * Reaction Rates * Neutron Moderation * Prompt And Delayed Neutrons * Neutron Flux Spectrum * Neutron Life Cycle * Reactivity * Reactivity Coefficients * Neutron Poisons * Xenon * Samarium And Other Fission Product Poisons * Control Rods * Subcritical Multiplication * Reactor Kinetics * Reactor

Pressure Vessel and Stacks Field Repair Manual

Author: Keith Escoe
Publisher: Elsevier
ISBN: 9780080559186
Format: PDF, ePub, Mobi
Download Now
Written from the practitioner's perspective, this book is designed as a companion for engineers who are working in the field and faced with various problems related to pressure vessels and stacks, such as: modification, retrofitting existing pressure vessels or stacks to either enhance process capability, lift, move or replace damaged equipment. This makes the book a valuable guide for new engineers who need to develop a feel for these types of operations or more experienced engineers who wish to acquire more useful tips, this handy manual provides the readers with rules of thumbs and tips to mitigate or remediate problems which can occur on a daily bases. Because of their size, complexity, or hazardous contents, pressure vessels and stacks require the highest level of expertise in determining their fitness for service after these operations. Care must be taken in installation / removal of the vessel to avoid damage to the shell. Damage to the shell can result in catastrophic failure and possible injury to personnel. The book will cover topics such as: lifting and tailing devices; an overview of rigging equipment; safety consideration; inspection and repair tips; methods to avoid dynamic resonance in pressure vessels and stacks; wind loads and how to apply them for various applications and assessment guidelines for column internals, tables and pressure vessel calculations, and code formulas. The examples in the book are actual field applications based on 40+ years of experience from various parts of the world and are written from a view to enhance field operations. In many parts of the world, often in remote locations, these methods were applied to repair pressure vessels and stacks. These problems will still continue to happen, so there is a need to know how to address them. This book is to present assessments and techniques and methods for the repair of pressure vessels and stacks for field applications. Also the book is to be a repair manual for easy use for mechanical engineers, civil-structural engineers, plant operators, maintenance engineers, plant engineers and inspectors, materials specialists, consultants, and academicians. Lifting and tailing devices An overview of rigging equipment Inspection and repair tips Guidelines for column internals Tables and pressure vessel calculations, and code formulas

Stage Rigging Handbook Third Edition

Author: Jay O. Glerum
Publisher: SIU Press
ISBN: 9780809327416
Format: PDF, Docs
Download Now
This fully indexed third edition remains the only book in any language that covers the design, operation, and maintenance of stage-rigging equipment.

Handbook of Rigging

Author: Joseph MacDonald
Publisher: McGraw Hill Professional
ISBN: 9780071640923
Format: PDF
Download Now
The Ultimate Guide to Designing and Operating Safe, Efficient Rigging Systems Recent years have seen an abundance of changes in the rigging industry. This popular, hands-on reference brings you completely up to date on equipment, materials, systems, and regulations that affect your profession. Whether you are a maintenance technician, hoist operator, worksite foreman, or any other specialist requiring the use of rigging equipment, this comprehensive guide will help ensure that your projects are completed in a cost-effective manner, without sacrificing safety and efficiency. Inside this fully updated guide to rigging: A broader-than-ever look at lifting, hoisting, and scaffolding operations Brand-new section covering the safe operation of equipment and rigging systems Up-to-date information on EPA and OSHA regulations governing the use of rigging equipment Directory of associations that publish research on safe rigging Bibliography of references that cover related subjects concerning rigging Handbook of Rigging covers: Codes & Standards OSHA Updates Engineering Principles Worksite Preparation Rigging Systems, Devices, and Tools Lifting & Hoisting Machinery Scaffolding & Ladders Protective Equipment Safety, Health, and Security Measures Fire Prevention & Protection Additional Resources

Material Handling Systems

Author: Charles Reese
Publisher: CRC Press
ISBN: 9781560328681
Format: PDF, ePub, Docs
Download Now
This book points out the safety and health concerns as well as the regulatory requirements for safe material handling. Many material handling venues are discussed from cranes to industrial robots. This diverse approach to material handling safety will be of interest to those who are responsible for safety or having material handling as a major component of their operation.